Specifications
Heated Devices
- Five heated zones standard: Two detectors, Two inlets, one auxiliary
- Methods stored: Two
Split/Splitless Capillary
- Range to 400°C in1°C increments
- Back-pressure design permits independent adjustment of split flow rate without affecting column flow
- Septum purge built in at 3 ml/min
- Accepts columns up to 1.2-mm od
- Multi mode design includes split and splitless injection
- Splitless purge time variable in 0.01-min elements
Flame Photometric Detector
- Range to 300°C
- 100-530 u id capillary columns fit through the transfer line to the base of the flame
- Two combustion modes: air/hydrogen or oxygen/hydrogen
- Detector signal display to view when flame is lit
- Push-button flame ignition
- Sulphur mode: Sensitivity to 20 pg S/second, Range 103, Selectivity 105 g S/g C
- o Phosphorus mode:Sensitivity to 0.9 pg P/second, Range 104, Selectivity 106 g P/g C
Column Oven
- Operating range: 4°C above ambient to 450°C
- Set point entry: 1°C for temperatures, 0.1 °C for program rates
- Programming: Rates 0.1 to 70°C per min, 650 min maximum run time, three ramps with initial/final holds
This refurbished HP 5890 II comes with single SSI and single ECD, Autosampler(injection tower, tray and controller, HP 7673, pictures not shown), HPIB Interface, PC with Suitable Software. It
is in great condition. It has been tested at SpectraLab Scientific.
Installation and extended warranty available upon request.
A 90 day warranty is included.
We are seasoned professionals in this area and we would be happy to have you speak with one of our experts here at SpectraLab.
Thanks for looking and we look forward to hearing from you!