|
Type |
Specification
|
|
GLP features |
Early maintenance feedback (EMF), electronic records of maintenance and errors |
|
Communications |
Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output |
|
Safety features |
Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display |
|
Injection range |
0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required) |
|
Precision |
Typically < 0.25% RSD from 5 – 100 µl, Typically < 1% RSD from 1 – 5 µl variable volume |
|
Pressure range |
400 bar (5880 psi) |
|
Sample viscosity range |
0.2 – 5 cp |
|
Sample capacity |
2 × well plates (MTP) + 10 × 2 ml vials 108 x 2-mL vials in2 x 54 vial plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2 mL vials54 Eppendorf tubes (0.5/1.5/2.0mL) in 2 x 27 Eppendorf tube plate Also compatible with the Agilent 1200 Series sample capacity extension for further expansion of the sample capacity |
|
Injection cycle time |
Typically < 30 s using following standard conditions: Default draw speed: 200 µl/min Default eject speed: 200 µl/min Injection volume: 5 µl |
|
Carry-over |
Typically < 0.01% using the following conditions: Column: 125 x 4 mm Hypersil ODS, 5 µm Mobile phase: Water/Acetonitrile = 80/20 Flow rate: 1 ml/min Injection volume: 1 µl caffeine (1 mg/ml), 5 µl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port |
This refurbished Agilent 1200 G1367B HiP ALS Autosampler is in a great condition. It has been tested at SpectraLab Scientific.
A 90 day warranty is included.
We are seasoned professionals in this area and we would be extremely happy to have you speak with one of our experts here at SpectraLab.
Thanks for looking and we look forward to hearing from you!
