This set of instruments include:
- 7800 ICP-MS G8421A
- SPS 4 Autosampler
- Recirculating Chiller
- Rough pump
- Data system
Product Description
The Agilent 7800 ICP-MS has been superseded by the new smart 7850 ICP-MS instrument. The 7850 ICP-MS is configured for fast setup and streamlined analysis in typical ICP-MS applications, saving you time and making it easier for your lab to deliver great results
- Fast track your routine metals analysis – ICP-MS MassHunter software includes preset methods that can be simply loaded and run with predefined setting, from plasma conditions to analyte integration time and internal standards. For new methods, the Method Wizard builds the method based on sample type and application.
- Reduce sample preparation – Unique High Matrix Introduction (HMI) technology, standard on the 7800 ICP-MS, lets you analyze samples containing up to 3% total dissolved solids (TDS) without dilution, reducing sample preparation and saving time.
- Minimize signal suppression – HMI reduces signal suppression, so high matrix samples can be measured accurately without requiring matrix matched calibration standards.
- Ensure accurate data with effective interference removal – Helium (He) collision mode simplifies method development and routine operation by removing polyatomic ion interferences under a single consistent set of conditions. He mode avoids the need for matrix or analyte-specific reaction cell conditions.
- Analyze major and trace analytes in a single run – The wide dynamic range orthogonal detector system (ODS) enables direct analysis of major elements (100s or 1000s of ppm) and trace level analytes (single or sub-ppt) in a single run. The high upper concentration limit reduces sample reruns caused by overrange results.
- Maximize throughput and productivity – The optional Integrated Sample Introduction System (ISIS 3) and the SPS 4 Autosampler lower your cost per analysis without compromising data quality.
