Type |
Specification |
Hydraulic system |
Dual plunger in series pump with proprietary servo-controlled variable stroke drive, floating plungers and active inlet valve |
Setable flow |
0.001 – 10 ml/min, in 0.001 ml/min increments |
Flow precision |
£ 0.07% RSD, or £ 0.02 min SD whatever is greater, based on retention time at constant room temperature |
Flow accuracy |
± 1% or 10 µl/min whatever is greater |
Pressure |
Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min |
Pressure pulsation |
pulsation < 2 % amplitude (typically < 1 %), at 1 ml/min is opropanol, at all pressures > 1 MPa (10 bar) |
Compressibility compensation |
User-selectable, based on mobile phase compressibility |
Recommended pH |
1.0 – 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel |
Gradient formation |
Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve Delay volume 800 – 1100 µl, dependent on back pressure |
Composition Range |
0 – 95 % or 5 – 100 %, user selectable |
Composition Precision |
< 0.2 % RSD, at 0.2 and 1 ml/min |
Control and data evaluation |
Agilent control software (e.g. Chem Station, EZ Chrom, OL, etc.) |
Communications
|
Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional |
Safety and maintenance
|
Extensive diagnostics, error detection and display (through control module and Agilent Lab Monitor & Diagnostic Software), leak detection, safe leak handling, leak output signal for shut down of pumping system. Low voltages in major maintenance areas. |
GLP features
|
Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with user-settable limits and feedback messages. Electronic records of maintenance and errors. |
Housing |
All materials recyclable |
The HP / Agilent 1200 Series quaternary pump provides high flexibility in solvent mixing and is particularly recommended for method development and for a wide range of research and routine applications.
This Agilent 1200 Series G1311A Quat Pump is in good shape. It has been tested at SpectraLab scientific.
A 90-day warranty is included.
We encourage you to contact us to speak with one of our expert and professional team members. Thanks for looking and we look forward to hearing from you!