Agilent 6890N GC System Capabilities:

• Dual channel design supports two inlets and two detectors
• Full range digital data output enables the smallest and largest peaks to be quantitated in a single run
• Full EPC is available for all inlets and detectors. Control range and resolution are optimized for the specific inlet or detector module
• EPC with capillary columns provides four column flow control modes: constant pressure, ramped pressure (3 ramps), constant flow, or ramped flow (3 ramps). Column average linear velocity is calculated
• Atmospheric pressure and temperature compensation is standard, so results do not change, even when the laboratory environment does
• Automatic Liquid Sampling is fully integrated into mainframe control
• Set point and automation control can be done from the local keyboard or via a networked data system. Clock-time programming can be initiated from the front panel to initiate events (on/off, method start, etc) at a future date and time
• A run time deviation log is created for each analysis to ensure that all method parameters were achieved and maintained
• Display of all GC and automatic liquid sampler (ALS) set points at the GC or data system
• Agilent supports open connectivity by providing communication protocols to other vendors

The CTC PAL sample injectors enable GC and GC/MS laboratories to increase productivity with greater automated sample preparation capabilities and a variety of sample vial options. The high-end CombiPAL sample injector offers three types of sample injection techniques: liquid injection, headspace, and solid-phase microextraction (SPME). The lower-cost GC PAL platform can be configured for liquid injection only but offers many of the other capabilities of the CombiPAL including large volume injection (LVI), multiple vial sizes, and extended sample vial capacity.

Features:

• Top-mounted on GCs to save valuable bench space
• Interfaces with any Agilent 6890 GC
• Integrated software control available for GC ChemStation, MSD Productivity Chemstation, and EZ Chrom
• SPME (CombiPAL only)
• Heated syringe headspace (CombiPAL only)
• Large-volume injection up to 500 µL
• Accommodates 4 vial sizes: 1 mL, 2 mL, 10 mL, and 20 mL
• Accommodates deepwell microplates and standard microplates

Agilent 7683 autosampler

• Injection Tower
• 100 Sample Tray
• Up to 99 injections per sample vial
• Introduction of sample volumes from 0.1 ul to 50 ul
• Variable sampling depths from -2 to +30 mm above default
• Two wash solvents for pre-and post-injection needle rinsing, virtually eliminating sample carryover
• Variable pre-and post-injection dwell times to match manual injections or allow large-volume injections
• A modular design, with options for increased automation
• Fast and easy transfer of sampler modules from one GC to another for minimal downtime

This refurbished Agilent 6890N GC with Agilent 7683 autosampler is in great condition. It has been tested at SpectraLab Scientific.

A 90 day warranty is included.

We have special expertise on analytical equipment. We encourage you to contact us to speak with one of our expert and professional team members.

Thanks for looking and we look forward to hearing from you!