Agilent 6890N GC System Capabilities:
-Dual channel design supports two inlets and two detectors.
-Full range digital data output enables the smallest and largest peaks to be quantitated in a single run.
-Full EPC is available for all inlets and detectors. Control range and resolution are optimized for the specific inlet or detector module.
-EPC with capillary columns provides four column flow control modes: constant pressure, ramped pressure (3 ramps), constant flow, or ramped flow (3 ramps). Column average linear velocity is calculated.
-Atmospheric pressure and temperature compensation is standard, so results do not change, even when the laboratory environment does.
-Automatic Liquid Sampling is fully integrated into mainframe control.
-Set point and automation control can be done from the local keyboard or via a networked data system. Clock-time programming can be initiated from the front panel to initiate events (on/off, method start, etc) at a future date and time.
-A run time deviation log is created for each analysis to ensure that all method parameters were achieved and maintained.
-Display of all GC and automatic liquid sampler (ALS) set points at the GC or data system. Agilent supports open connectivity by providing communication protocols to other vendors.
The CTC PAL sample injectors enable GC and GC/MS laboratories to increase productivity with greater automated sample preparation capabilities and a variety of sample vial options. The high-end CombiPAL sample injector offers three types of sample injection techniques: liquid injection, headspace, and solid-phase microextraction (SPME). The lower-cost GC PAL platform can be configured for liquid injection only but offers many of the other capabilities of the CombiPAL including large volume injection (LVI), multiple vial sizes, and extended sample vial capacity.
Features:
-Top-mounted on GCs to save valuable bench space
-Interfaces with any Agilent 6890 GC
-Integrated software control available for GC ChemStation, MSD Productivity Chemstation, and EZ Chrom
-SPME (CombiPAL only)
-Heated syringe headspace (CombiPAL only)
-Large-volume injection up to 500 µL
-Accomodates 4 vial sizes: 1 mL, 2 mL, 10 mL, and 20 mL
-Accomodates deepwell microplates and standard microplates
Dual mirco ECD
|
Specification |
|
|
Equipped with hidden anode, column stop, and high velocity flows for superior ruggedness |
|
|
Maximum operating temperature |
400 ºC |
|
Data acquisition rate |
Up to 50 Hz |
|
MDL |
<6 fg/mL Lindane |
|
Linear dynamic range |
>5 x 104 with lindane |
|
Dynamic range |
>5 x 105 with lindane |
|
Radioactive source |
<15 mCi 63Ni foil |
The refurbished HP / Agilent 6890A/N GC with Dual Micro ECD is in great condition. It has been tested at SpectraLab Scientific.
A 90 day warranty is included.
Installation and extended warranty available upon request.
We are professionals in this area and we would be happy to have you speak with one of our experts here at SpectraLab.
Thanks for looking and we look forward to hearing from you!
