System including:
Waters 2767 Sampler Manager
- Optional sample formats for injection and collection; microtiter plates (up to 15), test tubes (up to 580), scintillation vials or conventional autosampler vials
- Collection of sample fractions sequentially or with one-to-one mapping of sample and fraction
- Self-venting probes that perform accurate sample injections from tightly covered containers
- High velocity wash pump (>30 mL/minute flow) to rapidly and efficiently flush the sampling needle and tubing while maintaining high sample throughput
- Optional fume hood for ventilation of hazardous vapours
Waters 2545 Binary Gradient Module
- Operates at analytical and preparative scales
- Performs between flow rates of 0.50 to 150.00 mL/min with a pressure up to 6000 psi
- Integrates solvent selection valves on each solvent delivery channel to allow for rapid solvent changeovers and system purges
- Streamlines the purification process via MassLynx™ Software control using FractionLynx™ Application Manager
Waters System Fluidics Organizer SFO
The system fluidics organizer (SFO or FO) houses the columns, the pump control module, and either the primary fraction flow splitter for MS-directed systems or a UV fraction manager for UV-directed systems. An Ethernet switch in the system fluidics organizer serves as a connection point for the networked modules.
Waters 3100 Mass Detector
The Waters 3100 Detector is a single-quadrupole, atmospheric pressure ionization (API) mass spectrometer. Designed for routine UPLC®/MS analyses, it can scan at speeds up to 10,000 Da/s. Waters provides these ion sources with the instrument as standard equipment:
- ZSpray™ (dual orthogonal sampling) interface.
- Multi-mode ESCi® ionization switching for atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI).
Optional ionization modes are IonSABRE™ APCI and APPI (atmospheric pressure photoionization).
Waters 515 Pump (Qty 2)
The 515 HPLC pump is a programmable, free-standing HPLC pump available in isocratic, gradient, and semi-preparative configurations:
- Precise stepper motor control (48 steps/µL resolution) of dual reciprocating pistons
- Non-circular drive gears provide smooth, uniform eluent delivery
- User-programmable flow rate calibration and compressibility compensation factors ensure straightforward pump operation qualification
- Tests to retention time variations of less than 0.1% for highly reproducible peak performance
- Easy-to-read display and keypad for error-free programming
- Automatic purging and flow calibration
This Waters Sample AutoPurification System is in good condition. a PC with Masslynx Software installed,a rough pump and LC starter kit is included. It has been tested at SpectraLab Scientific.
A 90 day warranty is included.
We are professionals. We encourage you to contact us to speak with one of our expert and professional team. Thanks for looking and we look forward to hearing from you!